Knowledgebase: Construction Surveying
Connecting a Leica Builder Total Station to a Leica CC50 Using MicroSurvey Layout
Posted by John Coldrick on 01 November 2012 11:39 AM

This guide describes how to connect a Leica Builder total station to a Leica CC50 data collector using MicroSurvey Layout.

This guides describes 2 methods of connecting the Builder to the CC50.  The first method uses a wireless Bluetooth connection.  The section method describes connecting using a Leica serial cable.

You will create an instrument profile and then set up your Builder over a point, make a backsight observation, and then start measuring.

Click here to download this guide

Note:  if you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.

(0 vote(s))
Not helpful

Comments (0)