Knowledgebase: Construction Surveying
Connecting a Leica iCON Robot 50 to a Leica iCON CC51 using MicroSurvey Layout and Long Range Bluetooth
Posted by John Coldrick on 01 November 2012 11:55 AM

This guide describes how to connect a Leica iCON 50 robotic total station to a Leica CC51 data collector using MicroSurvey Layout and Long Range Bluetooth.

This guide actually describes 3 methods of connecting the iCON 50 to the CC51.  The first method uses the wireless Long Range Bluetooth connection.  The second method describes connecting using a Leica serial cable, and then we explain connecting using the short-range Bluetooth radios.

You will create an instrument profile and then set up your iCON 50 over a point, make a backsight observation, and then start measuring.

 

Click here to download this guide

 

 

Note:  if you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.

(3 vote(s))
Helpful
Not helpful

Comments (0)