Knowledgebase
How to Collect Stop and Go GNSS Data Using a GeoMax Z25 GNSS Receiver
Posted by John Coldrick on 04 July 2017 09:11 AM

This guide describes how to configure MicroSurvey FieldGenius to collect Stop and Go GNSS data using a GeoMax Z25 GNSS receiver.  The goal is to import this data into GeoMax Geo Office for later post processing.

This guide does not describe how to use GeoMax Geo Office.  If you are looking for support on this software, please contact your local GeoMax representative.

 

Click here to download this guide

 

 

Note:  if you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.

(0 vote(s))
Helpful
Not helpful

Comments (0)