Knowledgebase
MicroSurvey embeddedCAD 2015 Frequently Asked Questions
Posted by Brian Sloman on 03 July 2015 01:09 PM

The following are frequently asked questions and answers from new embeddedCAD users...


Q) What CAD engine does MicroSurvey embeddedCAD 2015 use?

A) MicroSurvey embeddedCAD is powered with Autodesk Technology™. It includes AutoCAD® OEM 2015 with Service Pack 2 to provide maximum compatibility between MicroSurvey embeddedCAD and AutoCAD software, including the latest DWG™ file support.


Q) Do I need to own an AutoCAD license?

A) Not at all! MicroSurvey embeddedCAD is an all-in-one package which includes both the underlying AutoCAD OEM engine plus the MicroSurvey survey, design, and modeling commands. However, if you do own an AutoCAD license you may be interested in our MicroSurvey inCAD product, which is an add-on for your AutoCAD software.


Q) What operating systems are supported?

A) MicroSurvey embeddedCAD 2015 supports 32-bit and 64-bit versions of Windows 7, 8, and 8.1. Further system requirement details are available here.

Please note that there are seperate installation packages for the 32-bit and 64-bit versions.


Q) Are MicroSurvey embeddedCAD and MicroSurvey CAD project files compatible with each other?

A) MicroSurvey embeddedCAD and MicroSurvey CAD projects are cross-compatible, with the following caveats:

MicroSurvey embeddedCAD 2015 can directly open any project created by MicroSurvey CAD 2005 or newer.

MicroSurvey embeddedCAD 2015 can directly open any .dxf file (but not a .flx file) created by MicroSurvey CAD 2004 or earlier.

MicroSurvey embeddedCAD 2015 projects can be indirectly opened by MicroSurvey CAD 2008-2015 by saving the .dwg file in an appropriate version supported by MicroSurvey CAD.

MicroSurvey embeddedCAD 2015 projects can be indirectly opened by MicroSurvey CAD 2005 or older by saving a .dwg or .dxf file in an appropriate version supported by MicroSurvey CAD, and by exporting/importing the coordinate database as an ASCII file and the traverses as RAW files.

Please see the MicroSurvey embeddedCAD 2015 Upgrade Notes article here for additional details.


Q) Are MicroSurvey embeddedCAD and MicroSurvey inCAD project files compatible with each other?

A) MicroSurvey embeddedCAD and MicroSurvey inCAD projects are 100% cross-compatible.

MicroSurvey embeddedCAD 2015 can directly open any project created by MicroSurvey inCAD 2006 or newer.

MicroSurvey embeddedCAD 2015 projects can be directly opened by MicroSurvey inCAD 2013-2015.

MicroSurvey embeddedCAD 2015 projects can be indirectly opened by MicroSurvey inCAD 2010-2012 by saving the .dwg file in an appropriate version supported by your AutoCAD (R2010 .dwg).

MicroSurvey embeddedCAD 2015 projects can be indirectly opened by MicroSurvey inCAD 2006 or earlier by saving a .dwg or .dxf file in an appropriate version supported by your AutoCAD, and by exporting/importing the coordinate database as an ASCII file and the traverses as RAW files.

Please see the MicroSurvey embeddedCAD 2015 Upgrade Notes article here for additional details.


Autodesk, AutoCAD, DWG, Powered With Autodesk Technology are registered trademarks or trademarks of Autodesk, Inc. in the USA and other countries.

(0 vote(s))
Helpful
Not helpful

Comments (0)