Knowledgebase
Evidence Recorder 7.0.0 Downloads
Posted by Jason Poitras on 22 July 2015 10:14 AM

January 15, 2010

Current Version - Evidence Recorder version 7.0.0

Read this to learn more about version 7.0.0 and to get a complete release history of Evidence Recorder 7.

Note: Evidence Recorder 7 is not a free upgrade. Users with a current Maintenance Subscription and Support Plan contract may contact MicroSurvey for a new registration code for EVR 7. Users who do not have a current MSSP contract, please contact your sales representative for more details.

Step 1: Install Microsoft ActiveSync or Windows Mobile Device Center

In order to install Evidence Recorder onto your handheld data collector, you must have Microsoft ActiveSync (for Windows XP or earlier) or Microsoft Windows Mobile Device Center (for Windows Vista) installed on your computer. Click here to download these free from Microsoft.

Step 2: Install Evidence Recorder

The installs below are single exe files that can be downloaded and executed from your desktop computer. The install will attempt to connect to your device through Activesync and install the software.

Don't miss steps 3-5 below the data collector installs at the bottom of this page.

Nautiz X7

TheNautiz X7runsa special build. When prompted on the data collector screen, install the program to "Device".

Download Single EXE

Archer & Allegro MX

When prompted on the data collector screen, install the program to "Device".

Download Single EXE

Allegro CE / CE.NET

Download Single EXE

Allegro CX

** If you use the Allegro CX Color model you will need to make sure you have the 1.06 version of the OS installed.

Download Single EXE

MicroSurvey Tracker Xtreme

If your Tracker is red then use this install.

Download Single EXE

MicroSurvey Tracker

If your Tracker is yellow then use this install.

Download Single EXE

Ranger

The Ranger is available with one of several operating systems.

Ranger running Windows Mobile 2003

This uses the PocketPC version.

Download Single EXE

** During installation, when prompted "Install MicroSurvey Evidence Recorder to the default installation location", answer No and select Disk as the target, otherwise it will be installed to Main Memory and there is great risk of data loss!

Ranger or TSC2 running Windows Mobile 5.0

This uses the Mobile 5/6 version.

Download Single EXE

Recon

Older units have the Windows CE.NET operating system, whereas newer versions ship with the Pocket PC operating system, and the newest versions ship with the Windows Mobile 5.0 or 6.0 operating system.

Recon running Windows CE.NET

You must have a Compact Flash storage card, and FieldGenius must be installed to the card.

Download Single EXE

Recon running Pocket PC

Download Single EXE

** During installation, when prompted "Install MicroSurvey Evidence Recorder to the default installation location", answer No and select Built-in Storage as the target, otherwise it will be installed to Main Memory and there is great risk of data loss!

Recon running Windows Mobile 5.0 or Windows Mobile 6.0

Download Single EXE

Nomad

This uses the Mobile 5/6 version.

Download Single EXE

Pocket PC & Windows Mobile 2003

HP iPAQ / Compaq 3150/3600/3800/3950/2210/2215/5450/5550 / Dell / Other PocketPC devices

Download Single EXE

** During installation, when prompted "Install MicroSurvey Evidence Recorder to the default installation location", answer No and select your Storage Card as the target, otherwise it will be installed to Main Memory and there is great risk of data loss!

Windows Mobile 5.0 & 6.0

HP iPAQ hx2495 / Juniper Archer / TDS Nomad / Other Windows Mobile 5 or 6 devices

Download Single EXE

Symbol 8100

The Symbol 8100 runs the PocketPC install.

Download Single EXE

** During installation, when prompted "Install MicroSurvey Evidence Recorder to the default installation location", answer No and select Storage Card as the target, otherwise it will be installed to Main Memory and there is great risk of data loss!

Tablet PC

The Evidence Recorder Tablet Edition was formerly known as the Desktop Emulator.

No Windows CE Device Required. This version can drive your Total Station or GPS equipment! Run Evidence Recorder on a Laptop or a Tablet PC and collect data in the field.

Note: this version can be licensed at the same price as the Windows CE version. It is a fully functional Laptop or Tablet PC product that allows you to hook up your computer to a total station or GPS equipment and collect data or stake out points.

You can also use it for training on your desktop. Supports both Landscape (Allegro, Tracker, Ranger) and Portrait (Archer, Recon, Pocket PC) displays.

Download Evidence Recorder Tablet Edition

Sokkia SHC2500

The Sokkia SHC2500 runsa special build. When prompted on the data collector screen, install the program to "Device".

Download Single EXE

Don't miss steps 3, 4, and 5 below the data collector installs at the bottom of this page!

Step 3: Install MicroSurvey Transfer

The MicroSurvey Transfer program provides an easy means of transfering Evidence Recorder project files between your data collector and your desktop computer.

Download MicroSurvey Transfer

Step 4 (Optional): Install Datum Grid Editor

GPS users will need to download this program, which is used to create a subset of the geodetic data files. These files are very large, covering all of North America, so we created this utility to extract a subset for your specific area. This subset must then be copied onto your Data Collector in the following directory, overwriting some of the existing files that are already there:

...\MicroSurvey EVR7\Programs\Mapping

Download Datum Grid Editor - 86.9 Megabytes (now you know why you got that high speed connection!)

Instructions for Datum Grid Editor use

Step 5: HAVE FUN!!!

(333 vote(s))
Helpful
Not helpful

Comments (0)