Connecting a Leica Builder Total Station to a Leica CC50 Using MicroSurvey Layout

This guide describes how to connect a Leica Builder total station to a Leica CC50 data collector using MicroSurvey Layout.

This guides describes 2 methods of connecting the Builder to the CC50.  The first method uses a wireless Bluetooth connection.  The section method describes connecting using a Leica serial cable.

You will create an instrument profile and then set up your Builder over a point, make a backsight observation, and then start measuring.

Click here to download this guide

Note:  if you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.