Start a conversation

How to Create a GPS Network Rover Profile Using South FieldGenius and a South S82 GNSS Receiver

This guide describes how to create a GPS GSM network profile using a South S82-V GNSS receiver, a Getac PS236 data collector, and South FieldGenius 2012.

Note: This guide also applies to the South S82-T and South S86-T GNSS receivers.

In this guide you will learn how to connect the South S82-V, via Bluetooth, to the Getac PS236.

You will then learn how connect to a GPS network data correction service (such as NTRIP), and begin measuring using this GPS network data stream.

Click here to download this guide.

Note: If you right-click on the above link and select either "Save Link As" or "Save Target as", you will be able to save this guide to your computer's hard drive.

Choose files or drag and drop files
Was this article helpful?
  1. John Coldrick

  2. Posted
  3. Updated