Evidence Recorder 18.104.22.168 Full Install
Posted by John Coldrick on 24 July 2015 12:23 PM
April 2011 - Evidence Recorder version 22.214.171.124
Evidence Recorder Manual
Looking for all the Evidence Recorder installs? Click here for a full list of installs.
Note: Evidence Recorder 126.96.36.199 is a free upgrade for owners of version 7.0 or higher!
Users with a current Maintenance Subscription and Support Plan (MSSP) contract may contact MicroSurvey for a new registration code for EVR 7. For users who do not have a current MSSP contract, please contact your sales representative for more details. EVR 7.0.0 licenses will run the 188.8.131.52 version.
If you do not know who your sales representative is, please click on this link and you will directed to the Dealer Locator page.
!*** Existing EVR users should manually record their instrument settings before proceeding with this installation ***!
Step 1: Install Microsoft ActiveSync or Windows Mobile Device Center
In order to install Evidence Recorder onto your hand-held data collector, you must have Microsoft ActiveSync (for Windows XP or earlier) or Microsoft Windows Mobile Device Center (for Windows Vista and 7) installed on your computer. Click here to download these free from Microsoft.
Step 2: Install Evidence Recorder
Evidence Recorder 184.108.40.206 uses an installer where all devices are available in the same install package. Download the install package below to your computer and run the setup. The install will attempt to connect to your device through Activesync or Windows Mobile Device Center and install the software.
Step 3: Install MicroSurvey Transfer
The MicroSurvey Transfer program provides an easy means of transferring Evidence Recorder project files between your data collector and your desktop computer.
Step 4 (Optional): Install Datum Grid Editor
Only GPS users may require this program. This is a desktop (runs on a PC, not a data collector) program is used to create a subset of a geoid model file.
What is a geoid model?
Why do I need to install and use the Datum Grid Editor?
GPS Users Only
Older Data Collectors
In the past, data collectors came with a smaller memory-storage capacity. Geoid model files could easily fill up the entire data collector's hard drive or were even too large to transfer to the device at all.
Because of this we created this utility that makes a subset of the geoid model that is small enough to fit onto a data collector's hard drive. Typically you would create a subset based on the location of the project area. Currently, all MicroSurvey data collectors come with an enormous storage-memory capacity therefore making geoid model subsets unnecessary (now we just copy the entire geoid model file onto the data collector), and that is one of the reasons why we say it is "optional".
If you wish to create a geoid model subset, click on the link below to download the Datum Grid Editor.
Note: The Datum Grid Editor currently only works on North American geoid models.
This subset must then be copied onto your data collector in the following directory, overwriting some of the existing files that are already there:
Remember: If you are not collecting data using GPS then you do not need to use a geoid model, and therefore do not need to use Datum Grid Editor. (Another reason why we say it is "optional".)
Download Datum Grid Editor - 110 Megabytes (now you know why you got that high speed connection!)
Step 5 (Optional): Desktop Version
You can install a desktop version of Evidence Recorder to use for training or testing. The desktop version now Windows Vista and 7 compatible. There is no need to run Evidence Recorder as an administrator.