Access the latest information about our two Survey Market Field Products: FieldGenius for Windows Supported Hardware FieldGenius for Android Supported GNSS Devices FieldGenius for Android Supported ...
Please link here to our Supported Hardware Resource to quickly find the latest information and notes about how FieldGenius works with your Controller, Total Station or GPS....
Once the user has selected a GNSS receiver and communication has been established, the GNSS toolbar will appear on the main interface. The GNSS Settings screen is accessed from the GNSS Toolbar. NOTE...
When FieldGenius is installed onboard a Leica Total Station, such as TS16 / TS60 / MS60, you may come across the following error message: Invalid communication settings for instrument. Port may alread...
The following was successful using GS14 Firmware 6.0.0. Later versions of the Firmware (Firmware 6.16) have been tested and WILL NOT WORK. Firmware 6.0.0. is currently the only known supported firmwar...
This document details the steps to connect and configure FieldGenius to the Sokkia iX series robotic total station. This document is specific to the iX series and FieldGenius version 9.3.24.0. For mor...
This document details the steps to connect and configure FieldGenius to connect to the Sokkia GRX2 GNSS receiver with a GSM modem. For information on how to configure the UHF radio, refer to the Field...
Why do you need to pair the RC-PR remote to a Total Station? Users will be required to pair the RC-PR remote to the Sokkia IX, SX, and SRX total stations if they have previously performed a reset on t...
This document details the steps to connect and configure FieldGenius to connect to the Sokkia GCX3 GNSS receiver. The document is specific to the GCX3 and FieldGenius version 9.3.24.0. Select the lin...
Activating the GS14 CDMA module so it will work with EVR: To activate the CDMA module in the GS14 so that you can use it as a Network Rover on the Verizon network, you require: A CS20 controller that ...