Workflow Guides

• Using Rover for Localization to Point

  An overview of procedures for localizing to a point or points by matching GPS observations to pre-defined control points and calculating a Plane similarity transformation. Link to Workflow Guide [http...

• Programing a Reference Receiver Using a Known Geodetic Position

  Programming a GNSS Receiver for a known geodetic position such as a published monument referenced to grid. Link to Workflow Guide [https://s3.microsurvey.com/support/Knowledgebase/how_to_guides/KnownG...

• Programing a Reference Receiver Using Local Transformation to Point (Day 2)

  Returning to a job created using the procedure in the Day 1 video, and continuing to collect points which will compare accurately with points already collected. Link to Workflow Guide [https://s3.micr...

• Programing a Reference Receiver Using Local Transformation to Point (Day 1)

  Starting a new job in which you plan to program the base to a known point, which may be at an assumed coordinate or a published location.  An option will be presented to compute a local Grid to Ground...

• Programing a Reference Receiver Using Averaged Geodetic Position (Day 2)

  Returning to the existing job created using the Day 1 procedure on subsequent days. Link to Workflow Guide [https://s3.microsurvey.com/support/Knowledgebase/how_to_guides/AveragedGeodeticPositionDay2....

• Program your Reference Receiver Using Averaged Geodetic Position (Day 1)

  Starting a new job in which you have no known points and simply wish to start storing points with State Plane or UTM coordinates referenced to grid. Link to Workflow Guide [https://s3.microsurvey.com/...

• Field Tutorial - Volume Calculation

  PDF tutorial showing volume calculation procedure in MicroSurvey FieldGenius. Sample project included. ...