FieldGenius Supported Hardware
Certain devices are not supported with FieldGenius depending on their OS and sometimes brands, so please take a look at the Supported Data Collectors article for more information.
MicroSurvey has migrated almost all GNSS device drivers from FieldGenius Legacy to the new FieldGenius multiplatform solution. Development will continue on both products.
The reworked new drivers have been reviewed and internally tested by MicroSurvey to the best of our ability and we believe that the driver will operate properly with the listed models. We would encourage users who encounter problems with existing drivers to report any issues so that we can work with them to get the GNSS receiver model fully supported and tested. A video of the process and a trace file will allow our developers to diagnose the problem and offer a solution for testing in days. Use the Feedback feature to contact the support and development teams directly.
See the Release notes History for an overview of new features added with each release.
GNSS supported Drivers
FieldGenius Supported hardware
| Make | Model | Supported Firmware |
Comments | Released |
| Acnovo | GX900 | 1.3 | ||
| Acnovo | GX10 | 1.3 | ||
| Acnovo | GX9 | G9-150923 | 1.3 | |
| Acnovo | RX9 | 1.0 | ||
| Acnovo | BX9 | 1.3 | ||
| Altus | APS-NR2 | 1.3 | ||
| Altus | APS-3 Rev 1 | 1.3 | ||
| Altus | APS-3 Rev 2 | 1.3 | ||
| Altus | APS3G | 1.5 | ||
| Ashtech | Promark 100/200 | 1.5 | ||
| Bad Elf |
Flex |
NMEA Driver |
1.6 |
|
| Bad Elf | GNSS Surveyor | NMEA Driver | 1.7 | |
| Bad Elf | GPS Pro/Pro+ | NMEA Driver | 1.7 | |
| Benchmark | BMG80 | If you are experiencing Base-Rover issues, please contact MicroSurvey Support at 1-250-707-0000. Unsupported on Windows |
1.5 | |
| Bince | N90 | If you are experiencing Base-Rover issues, please contact MicroSurvey Support at 1-250-707-0000. | 1.5 | |
| Champion | Pro | Unsupported on Windows |
1.5 | |
| Champion | WR1 | 1.5 | ||
| Champion | TKII | 1.3 | ||
| Champion | nV3 | F100910T_1.2 | 1.3 | |
| Champion | TKO | 1.3 | ||
| CHC |
LT700H |
Unsupported on Windows |
1.8 |
|
| CHC |
LT800H |
Unsupported on Windows |
2.6 |
|
| CHC |
i93 |
Unsupported on Windows |
2.6 |
|
| CHC | i90 | Unsupported on Windows |
1.3 | |
| CHC |
i89 |
Unsupported on Windows |
2.6 |
|
| CHC |
i83 |
Unsupported on Windows |
2.6 |
|
| CHC | i80 | Unsupported on Windows |
1.3 | |
| CHC |
i73+ |
Unsupported on Windows |
2.6 |
|
| CHC | i73 | Unsupported on Windows |
1.3 | |
| CHC | i70 | Unsupported on Windows |
1.3 | |
| CHC | i50 | Unsupported on Windows |
1.3 | |
| CHC | iBase |
Unsupported on Windows |
2.6 |
|
| CHC | X91+/X900+ |
Unsupported on Windows |
1.3 |
|
| ComNav | RTK (IMU) | T30, T300+, N3,N5, | 2.0 | |
| ComNav | RTK | T300 | 2.0 | |
| CY |
F100 |
|||
| CY | F90 | 1.2 | ||
| EFIX |
F7+ |
Unsupported on Windows |
2.6 |
|
| EFIX |
F8 |
Unsupported on Windows |
2.6 |
|
| EFIX |
C5 |
Unsupported on Windows |
2.6 |
|
| EFIX |
C8 |
Unsupported on Windows |
2.6 |
|
| EFIX |
Ebase |
Unsupported on Windows |
2.6 |
|
| eGPS | eGPS20T | 1.3 | ||
| Emlid | RX | 2.4 | ||
| Emlid | Reach RS/RS+ (NMEA) |
Local transformation is recommended for every job site Setup Guides |
1.3 | |
| Emlid | Reach RS2 (NMEA) |
Local transformation is recommended for every job site Setup Guides |
1.3 | |
| Emlid |
Reach RS3 (NMEA) |
Tilt supported in release 3.0 Setup Guides |
2.5 | |
| Eos | Arrow | 1.7 | ||
| eSurvey |
E800H |
|||
| eSurvey |
E800T |
|||
| eSurvey | E600H | 1.0 | ||
| eSurvey | E600T | 1.0 | ||
| eSurvey | E600N | 1.0 | ||
| eSurvey | E500 | 1.9 | ||
| eSurvey |
E300 Pro |
|||
| eSurvey | E300 | 1.0 | ||
| eSurvey |
E200 |
|||
| eSurvey | E100 | 1.2 | ||
| FOIF | A90 | 0.22.180806(G) | 1.5 | |
| FOIF | A60 | 171025 | 1.3 | |
| FOIF | A30 Pro | 1.3 | ||
| FOIF | A30 - Trimble | 1.0 | ||
| FOIF | A20/A20 + - Trimble | 1.3 | ||
| GENEQ |
SXBlue Smart |
|||
| GENEQ | G20 |
|||
| GENEQ |
G20M |
|||
| GENEQ |
F100 |
|||
| GENEQ |
F90 |
1.3 |
||
| GENEQ |
SXBlue Premier |
1.2 |
||
| GENEQ | SXBlue Platinum | 1.0 | ||
| GENEQ | SXBlue | 1.1 | ||
| GENEQ | SXPro GPS | 1.0 | ||
| GENEQ | SXPro GNSS | 1.3 | ||
| GENEQ | SXPro RTK | 1.3 | ||
| GENEQ | SXPad | 1.3 | ||
| GENEQ | G10 | 1.3 | ||
| geo-FENNEL | FGS100 | 1.3 | ||
| geo-FENNEL | FGS1 | 1.5 | ||
| GeoMate |
SG5 |
2.6 |
||
| GeoMate |
SG6 |
2.6 |
||
| GeoMate |
SG7 |
2.6 |
||
| GeoMax |
Zenith60 Pro | 3.2 | ||
| GeoMax | Zenith60 | 2.0 | ||
| GeoMax |
Zenith55 | 3.2 | ||
| GeoMax | Zenith40 | 5.01 | 1.3 | |
| GeoMax | Zenith35Pro | 2.25.180202 | 1.3 | |
| GeoMax | Zenith35 | 2.25.180202 | 1.3 | |
| GeoMax | Zenith25/25Pro | 5.01 | Currently will not display satellites | 1.3 |
| GeoMax | Zenith16 | 1.3 | ||
| GeoMax | Zenith15 | 1.5 | ||
| GeoMax | Zenith10/20 | GMZ151215V2.18 | 1.0 | |
| GeoMax |
Zenith06 |
Known Bluetooth connection issue, being investigated |
2.5 |
|
| GeoMeasure | PinPoint | 3.2 | ||
| GeoMeasure | Nano7 | 3.2 | ||
| Geoobchod | geoGEN | 3.2 | ||
| Geozone | Falcon SF | Onyx, 1.02, dec 4 2018 | 1.1 | |
| GINTEC |
G20 |
|||
| GINTEC |
G20M |
|||
| GINTEC |
G10 |
0.22.170308 (G10) |
1.3 |
|
| GINTEC | G9 | G9-150923 | 1.1 | |
| Hemisphere | S631/C631 | 1.7 | ||
| Hemisphere | S321 | 1.39.171116 | 1.3 | |
| Hemisphere | S320 | 1.1 | ||
| Hemisphere | AtlasLink | 1.1 | ||
| Hemisphere | Crecent | 1.1 | ||
| Hi-Target | V100 | 1.5 | 1.0 | |
| Hi-Target | V90 Plus | 1.3 | ||
| Hi-Target | V60 | 1.0 | ||
| Hi-Target | V30 | 1.3 | ||
| Hi-Target | Qstar 8 | 1.2 | ||
| Hi-Target | Qstar 6 | 1.6 | ||
| Horizon | Kronos 500 | 1.0 | ||
| Horizon | Kronos 300 | 1.0 | ||
| Horizon | Kronos 200 | 1.3 | ||
| Horizon |
C3 |
Unsupported on Windows |
1.0 |
|
| Howay | P78 | 1.3 | ||
| iGAGE | iG9 | 1.3 | ||
| Kolida | RTK IMU | K30 Pro, K1 Pro | 1.3 | |
| Kolida |
RTK |
|||
| Kolida |
K1 Pro |
1.7 |
||
| Kolida |
K20s |
1.7 |
||
| Kolida | K10 | 1.3 | ||
| Kolida | K58Plus | 1.3 | ||
| Kolida | K86 + | 1.0 | ||
| Kolida | New K5 PLUS+ | 1.3 | ||
| Kolida | K5 PLUS+ | 1.3 | ||
| Kolida | K5 PLUS | 1.3 | ||
| Kolida | K5 Infinity | 1.5 | ||
| Kolida | K3 | 1.0 | ||
| Kolida | K9 Mini | 1.3 | ||
| Kolida | K9T | K96-T - issue with Reference setup not broadcasting configuration |
1.0 | |
| Kolida | K9TX | 1.3 | ||
| Kolida | S680N | 1.3 | ||
| Kolida | S680P | 1.5 | ||
| Kolida | S680 | 1.0 | ||
| KQ GEO |
M8mini IMU |
|||
| KQ GEO |
M8mini | M8_K1_01 | 1.1 | |
| KQ GEO | M8 | M8_K3_02 | 1.1 | |
| Leica | GS18 | 8 |
IMU Tilt Support Requires firmware 9.0 or newer starting 1-Jan-2025 for Tilt to work. Info on updating firmware provided by Spatial here. |
1.3 |
| Leica | GS16 | 8 | 1.5 | |
| Leica | GS16L | 8 | 1.5 | |
| Leica | GS15 | 8 | 1.3 | |
| Leica | GS14 | 1.5 | ||
| Leica | GS10 | 1.2 | ||
| Leica | GS07 | issue with receiving corrections using firmware version (OEM7.813.0.fw) | 1.5 | |
| Leica | Zeno Connect |
NMEA Driver Configuration Guide Unsupported on Windows |
1.0 | |
| Leica | Zeno GG04+ |
Configuration Guide Unsupported on Windows |
||
| Leica | Zeno FLX100 |
Configuration Guide (v3.0 and v3.1) Setup Video |
3.0 | |
| Leica | Zeno FLX100 plus |
Setup Video |
3.2 | |
| Linertec | LGN-100 | 1.0 | ||
| Linertec | LGN-200S | 1.0 | ||
| marXact | UNI-GR1 | 1.0 | ||
| Nautiz |
X6 (Mock) |
|||
| NavCom | SF-3040 | Sapphire,03.0.08,SCN | UHF only Not actively supported |
1.0 |
| NavCom | SF-3050 | 1.0 | ||
| NMEA |
Basic |
1.0 |
||
| Pentax | G2 Series | 2.3 | ||
| Pentax | G7H | 1.9 | ||
| Pentax |
G7N |
1.9 |
||
| Pentax | G6 / G6J | 5.11 | 1.3 | |
| Pentax |
G6J2 |
1.9 |
||
| Pentax | G5w | 1.0 | ||
| Pentax | G2100 | 1.3 | ||
| Pentax | G5100T | 1.3 | ||
| Pentax | G3100-R2 | 1.3 | ||
| Pentax | G3100-R1 | 1.3 | ||
| Pentax | SMT888-3G Rev3 | 1.0 | ||
| Pentax | SMT888-3G Rev 2 | 1.3 | ||
| Pentax | SMT888-3G | Issue Configuring UHF radio | 1.0 | |
| Polaris | S100 | 1.7 | ||
| Prexiso | G4/G5 | 1.3 | ||
| proNIVO |
PNR21 |
|||
| Ruide | RTK IMU | 1.5 | ||
| Ruide |
RTK |
|||
| Ruide | COMET R8i | 1.3 | ||
| Ruide | R6p | 1.3 | ||
| Ruide | R90i | 1.5 | ||
| Ruide | NOVA R6i | 1.0 | ||
| Ruide | NOVA R6 | 1.2 | ||
| Ruide | R90T | 1.3 | ||
| Ruide | S680N | 1.5 | ||
| Ruide | S680P | 1.2 | ||
| Ruide | S680 | 1.2 | ||
| SANDING | RTK IMU | 1.3 | ||
| SANDING |
RTK |
|||
| SANDING | T66pro | 1.2 | ||
| SANDING | T3 | 1.2 | ||
| SANDING | T66V | 1.2 | ||
| SANDING | T66 | 1.3 | ||
| SANDING | S680N | 1.3 | ||
| SANDING | S680P | 1.3 | ||
| SANDING | S680 | 1.3 | ||
| SANDING | T9 | 1.3 | ||
| Satlab | SL800 | 1.3 | ||
| Satlab | SL600 | 1.3 | ||
| Satlab | SLC | 1.3 | ||
| Septentrio | Altus NR3 | known issue with receiving corrections | 1.5 | |
| Septentrio | Altus NR2 | 1.3 | ||
| Septentrio | Altus APS3G | 1.3 | ||
| SLAGEN | T9 | 1.2 | ||
| SLAGEN | T9-H1 | 1.3 | ||
| SLAGEN | Z7sat | 1.0 | ||
| SLAGEN | R9s | 1.5 | ||
| Sokkia | GCX3 | 1.0 | ||
| Sokkia | GRX2 | 1.0 | ||
| Sokkia | GRX1 - UHF II | 1.0 | ||
| Sokkia | GRX1 - UHF I | 1.0 | ||
| South | RTK IMU (INNO7) | IMU Tilt Support | 1.5 | |
| South |
RTK IMU (G6) |
IMU Tilt Support |
1.5 |
|
| South |
RTK IMU (G2) |
IMU Tilt Support |
1.5 |
|
| South |
RTK IMU (G7) |
1.09.240524.RA52PY |
IMU Tilt Support |
1.5 |
| South |
RTK |
|||
| South | GALAXY G6 | 1.3 | ||
| South | New GALAXY G1 Plus | 1.08.190304.RG11GL | Magnetic Tilt Support | 1.0 |
| South | New GALAXY G1 | 1.3 | ||
| South | GALAXY G1 Plus | 1.08.190304.RG13GL | tilt position issue | 1.0 |
| South | GALAXY G1 | Linux version UHF radio configuration issue | 1.0 | |
| South | S82-2013 | 1.0 | ||
| South | S86-2013 | 1.0 | ||
| South | S660N | 1.2 | ||
| South | S660P | 1.2 | ||
| South | S660 | 1.3 | ||
| South | S82-V | 1.3 | ||
| South | S82-T | 1.3 | ||
| South | S86-T | 1.3 | ||
| South | X5 | 1.3 | ||
| South | S760 | 1.3 | ||
| SparkFun RTK |
Manufacturer Configuration Guide |
2.6 | ||
| Spectra Precision |
SP80 |
Known Issue, loses fix after first measurement/movement of Rover |
1.2 |
|
| Spectra Precision |
SP60 |
Known Issue, loses fix after first measurement/movement of Rover |
1.5 |
|
| Spherefix | SP40 |
2.5 | ||
| Spherefix |
SP30 |
2.5 | ||
| Spherefix |
SP20 |
2.5 | ||
| Spherefix |
SP10 |
|||
| Stonex |
S10A |
0.31.170712 (Stonex) |
1.0 |
|
| Stonex |
S10 |
0.22.171108 (Stonex) |
1.0 |
|
| Stonex |
S9i |
0.18.161114 (Stonex) |
1.0 |
|
| Stonex |
S990A |
1.7 |
||
| Stonex |
S990+ |
2.5 |
||
| Stonex | S980A |
IMU Tilt Support |
1.9 |
|
| Stonex | S980+ |
2.5 |
||
| Stonex |
S980 |
1.7 |
||
| Stonex |
S900 |
0.22.180604 (Stonex) |
1.0 |
|
| Stonex |
S900A |
0.22.181113 (Stonex) |
IMU Tilt Support |
1.0 |
| Stonex | S900+ |
2.5 |
||
| Stonex | S900T |
0.22.180604 (Stonex) |
1.0 |
|
| Stonex | S850A | 0.22.191112A | 1.3 | |
| Stonex | S850+ |
2.5 |
||
| Stonex |
S800 |
0.22.171225 (Stonex) |
1.0 |
|
| Stonex | S800A | 1.3 | ||
| Stonex | S700A | 1.3 | ||
| Stonex |
S580 |
2.6 |
||
| Stonex | S9III Plus | S9-161114V1.29 | 1.0 | |
| Stonex | S8 Plus | 1.0 | ||
| TechGeo |
GTR-G2 XL |
|||
| Tersus |
Oscar Ultimate |
1.0 |
||
| Tersus |
Oscar |
2.1.0 | 1.0 |
|
| Tersus |
NeoRTK |
1.0 |
||
| TEXCEL |
TX10 |
1.3 |
||
| TEXCEL |
TX08 |
1.3 |
||
| TokNav |
T8 Global |
3.2 |
||
| TokNav |
T8 |
3.2 | ||
| TokNav |
T8 Pro | 3.2 | ||
| TokNav | T20 Pro |
2.5 | ||
| TokNav |
T20 |
2.5 |
||
| TokNav |
T10 Pro |
2.5 | ||
| TokNav |
T5 |
2.5 | ||
| TokNav |
T5 Lite |
2.5 |
||
| Topcon | GR-3 | No Network RTK Unmaintained |
1.0 | |
| Topcon | HiPer V | No Network RTK Unmaintained |
1.3 | |
| Topcon | HiPer II | No Network RTK Unmaintained |
1.3 | |
| Topcon | HiPer | HiPer Lite + requires Radio configured externally No Network RTK Unmaintained |
1.3 | |
| Topcon | Legacy | No Network RTK Unmaintained |
1.0 | |
| Topcon | Odyssey | No Network RTK Unmaintained |
1.3 | |
| UBlox | NMEA Driver | 1.0 | ||
| ZSurvey | Z3 | Unsupported on Windows |
1.3 | |
| ZSurvey | Z6 | 1.3 | ||
| ZSurvey | Z8 | Unsupported on Windows |
1.3 | |
| a-GEO |
L6U |
2.3 |
||
| a-GEO |
L8 |
2.0 |
||
| a-GEO |
NetBox1 Pro |
2.0 |
||
| a-GEO |
NetBox |
2.0 |
Ken Fossey
Comments