Why reset the Sokkia RC-PR Remote? In the event the the Sokkia RC-PR remote will not pair with a total station or Bluetooth communication is problematic, resetting the RC-PR initializes the Bluetooth ...
Over the years we have noted which communication parameters allow customers to connect with their Nikon or Sokkia Instruments in FieldGenius or Evidence Recorder when they are using a serial cable. W...
Select the link below to download the configuration guide for FieldGenius 9.3.23.0 or Evidence Reocrder 11.1.23.0 or newer....
After updating to FieldGenius 8.3 or later some users have reported issues when connecting to their GeoMax devices (such as Zenith 25) via bluetooth when using a Windows 10 tablet. Follow the steps be...
The Stonex S10 GPS reciever has a special utility tool to calibrate the sensor's tilt compensator. This calibration tool requires multiple steps to complete and must be preformed on a data collector r...
FieldGenius, Layout, Seismic Surveyor and Evidence Recorder can connect with the Topcon ES. Please note that Rapid S EDM mode will not be available. To prepare the Topcon, follow these steps: 1. Go to...
This guide describes how to configure MicroSurvey FieldGenius to collect Stop and Go GNSS data using a GeoMax Z25 GNSS receiver. The goal is to import this data into GeoMax Geo Office for later post ...
If you have an Altus APS-3 and want to use the GSM module to make your receiver a Network Rover you need to contact your internet service provider and ensure that the SIM card they will provide meets ...
This guide describes how to start Kolida FieldGenius on your Kolida total station, create a new project, setup your instrument over a point, measure a backsight, and start surveying. This is the perf...
This guide describes how to connect a Leica iCON 50 robotic total station to a Leica CC51 data collector using MicroSurvey Layout and Long Range Bluetooth. This guide actually describes 3 methods of c...