Start a conversation

Hardware

  • How to create an Network Profile with a Leica GS15 Receiver

    This guide describes how to create a GPS GSM network profile using a Leica GS15 receiver, a CS10 data collector, and FieldGenius 2011. You will then learn how connect to a GPS network data correction ...

  • Pentax Total Station Connection Guide

    Download this document for a guide to connecting the Pentax 425 with FieldGenius....

  • Sokkia GRX1 Setup (Rover Radio)

    Download this document for a guide to configuring a Sokkia GRX1 or Topcon Hyper 2 rover for RTK roving using a radio for NTRIP Connection....

  • Leica Flexline setup guide

    This document contains setup instructions for connecting FieldGenius or Evidence Recorder to a Leica Flexline....

  • Sokkia GRX1 Rover - NTRIP

    This document explains how to configure FieldGenius to connect to a Sokkia GRX1 ISX GPS Rover Receiver or Topcon Hyper 2, using an NTRIP server....

  • Leica RX1250 & GPS 1200 GPRS

    This document explains how to connect FieldGenius on a Leica RX1250 Controller to a 1200 series GPS rover, using a GPRS connection. See all RX1250 documents and movies here: http://helpdesk.microsurve...

  • AshTech ProMark 500 Rover Receiver with PDL Radios

    Download this file for a guide to configuring and connecting your AshTech PM 500 Rover. You will also need the guide relating to the base receiver for this configuration. Base receiver link: http://la...

  • Sokkia GSR2700 ISX Rover <NTRIP>

    This document explains how to configure FieldGenius to connect to a Sokkia GSR2700 ISX GPS Rover Receiver, using an NTRIP server. Link: https://s3.microsurvey.com/os/GPS/Sokkia/Sokkia_GSR2700ISX_Rover...

  • Leica RX1250 & TPS 1200 Direct

    This document explains how to connect FieldGenius on a Leica RX1250 Controller to a 1200 series total station, using either a serial cable or a wireless bluetooth connection. See all RX1250 documents ...

  • Topcon GPT-9003A & FC-2200 - Robotic

    This document explains how to connect FieldGenius on a Topcon FC-2200 controller to a Topcon GPT-9003A robot. (Note: requires FieldGenius 2008 v4.0.0 or newer)...