Field Genius Legacy is compatible with all Leica Receivers listed in the title. The GS07 is also supported but is a different type of device. There are a few notes about requirements with these high...
The following was successful using GS14 Firmware 6.0.0. This is currently the only known supported firmware. Part 1: Pair the GS14 using Windows Bluetooth Options: 1) Add a Bluetooth device to the Win...
The Issue: FieldGenius has a feature that is used when configuring a Base/Rover RTK link that allows users to specify a base station ID to be transmitted by the base, and a base station ID filter when...
MicroSurvey FieldGenius fully supports Leica's many receiver models from the GS14 upwards. FieldGenius is primarily used in an RTK environment as it allows for simple topography work and combines easi...
Extra Safe Mode for Geomax Zenith35 Pro Some users reported that FieldGenuis displays a 'Fixed' solution, but upon performing checks, noticed that a small number of measurements are off by as much as ...
MicroSurvey FieldGenius for Windows and MicroSurvey FieldGenius for Android support static (raw) logging with many receivers. Review this Help article for a list of receivers that support this functio...
This article goes over how to configure and set up the Atlas corrections in FieldGenius. You will be required to have an Atlas subscription active with your GNSS unit in order to use this feature. Ste...
This article will walk you through how to use the NGS website to search and confirm your GNSS antenna offsets. 1. Click here to go to the NGS website. 2. Hit the drop drown arrow to browse for the M...
Using Leica myWorld to Identify Radio and Firmware for Configuring RTK Link with Leica GS14, 15, 16 and 18 *Refer to this Article for configuration steps in FieldGenius In some cases users are having ...
GS14-GS15-GS16-GS18 GNSS GS14 (8.00) GS15 (Untested) GS16 (8.00) GS18 (4.10) Tablet Win 10 2 Hz position update rate. Confirming Radio and Firmware with Leica GS14,15,16 and 18 GS14 to Mesa 2 Using Da...