A PAN (Personal Area Network) connection is used when connecting connecting the tablet version FieldGenius to a Leica GS16 / GS18 GPS. This guide explains how to establish a PAN connection using Windo...
The following was successful using GS14 Firmware 6.0.0. Later versions of the Firmware (Firmware 6.16) have been tested and WILL NOT WORK. Firmware 6.0.0. is currently the only known supported firmwar...
General info about NMEA Stream The Emlid transmits a position as a NMEA stream FieldGenius for Windows can be used with EMLID's highly affordable GPS solution. Some notes: Network Rover RTK solution o...
This document details the steps to connect and configure FieldGenius to connect to the Sokkia GCX3 GNSS receiver. The document is specific to the GCX3 and FieldGenius version 9.3.24.0. Select the lin...
This document details the steps to connect and configure FieldGenius to connect to the Sokkia GRX2 GNSS receiver with a GSM modem. For information on how to configure the UHF radio, refer to the Field...
Activating the GS14 CDMA module so it will work with EVR: To activate the CDMA module in the GS14 so that you can use it as a Network Rover on the Verizon network, you require: A CS20 controller that ...
PDF guide showing how to configure GNSS Rover Configure GNSS Rover...
PDF guides for Local Transformation Day 1 and Day 2 Local Transformation Day 1 Local Transformation Day 2...
PDF guides for Averaged Geodetic Position Day 1 and Day 2 Averaged Geodetic Position Day 1 Averaged Geodetic Position Day 2...
PDF tutorial showing how to configure a Reference Profile Configure Reference Profile...