Understanding Leica's GeoCOM Authentication license In this article, we will explain Leica's GeoCOM authentication process as it affects users of FieldGenius or Evidence Recorder. IMPORTANT NOTE Le...
Version Release Date GNSS Total Station 10.2.30.3 April 24, 2019 Information Table Information Table...
Leica's TS13 GeoCOM Authentication license In this article, we will explain how to confirm if the Leica TS 13 instrument has GeoCOM Authentication. The TS13 requires a "GeoCOM Authentication" license ...
Leica iCON iCB30 Connection Guide The link below is to the Leica iCON iCB30 connection guide first added to FieldGenius version 10.2.30.3 and Evidence Recorder 11.4.30.3. https://s3.microsurvey.com/fi...
When FieldGenius Legacy is installed onboard a Leica Total Station, such as TS16 / TS60 / MS60, you may come across the following error message: Invalid communication settings for instrument. Port may...
This guide describes how to connect a GeoMax Zoom80 robotic total station to a Getac PS236 data collector using MicroSurvey FieldGenius and Long Range Bluetooth. In this guide you will learn how to co...
Step 1: Enabling Geocom Mode: To work with Geomax Zoom 80 you must obtain an extended Geocom license from Geomax. Copy the license file onto the instrument CF card as per the instructions that were in...
Follow this guide to configure the Geomax Zoom 80 to connect with each of the following Data Collectors: Allegro MX with a Leica Radio module Geomax Zoom 80 C Controller Leica RX 1250 Controller (use ...
This guide describes how to create a robotic total station profile using a Leica TS15 robotic total station, a Leica CS15 controller, and MicroSurvey FieldGenius 2012. This guide will work for both th...
When the multiset routine is run in FieldGenius, the user can observe the backsight and foresight as many times as required. FieldGenius can tell if the measurement is face right or face left by check...