FieldGenius allows the user to log rover raw data for later post processing. The log files are stored on a memory card in the receiver, and the file type will vary depending on the make and model of t...
The NTRIP protocol can offer many configurations for servicing GNSS rover instruments with access to multiple GNSS reference instruments. The following steps provide a simple example of configuring ...
The Leica Zeno range of devices are popular for use with MicroSurvey FieldGenius for Windows and Android. See below for configuration information: Leica Zeno with FieldGenius for Windows: There is a ...
FieldGenius allows you to command a gps receiver to start and stop the collection of "raw" static gnss data. This allows you to perform post-processing to refine your positions after the fieldwork is...
This guide describes how to connect a Leica iCON gps 60 GNSS receiver to a data collector running the Windows Mobile 6 operating system using MicroSurvey Layout. Click here to download this guide ...
This guide describes how to connect a Leica GS14 GNSS receiver to a Leica CS15 controller using MicroSurvey FieldGenius. This guide describes connecting to the Internet using the GSM Modiule inside th...
This guide describes how to create a GPS GSM network profile using a South S82-V GNSS receiver, a Getac PS236 data collector, and South FieldGenius 2012. Note: This guide also applies to the South S82...
This guide describes how to create a GPS GSM network profile using a GeoMax GNSS Zenith 10 or Zenith 20 receiver, a Getac PS236 data collector, and MicroSurvey FieldGenius 2012. With some small modifi...
This guide describes how to create a GPS GSM network profile using a Leica GS15 receiver, a CS10 data collector, and FieldGenius 2011. NOTE: If you are using Smartnet, it may be necessary to determine...
Use this short article as a guide to computing transformation parameters WHILE you collect GPS observations. Be sure to watch the movies first. Download Document...