The NTRIP protocol can offer many configurations for servicing GNSS rover instruments with access to multiple GNSS reference instruments. The following steps provide a simple example of configuring ...
FieldGenius allows you to command a gps receiver to start and stop the collection of raw static gnss data. This allows you to perform post-processing to refine your positions after the fieldwork is c...
We put a lot of effort into improving FieldGenius' stakeout routines. We added a lot more functionality and intelligence. I created a guide that you can use to try out the new improvements. I also inc...
We improved the coordinate system editor when we release FieldGenius 2012 version 6.0.0 on March 13, 2012. You can now create your own customer coordinate system, edit it, or copy an existing system a...
This guide explains the new Coordinate System Editor in MicroSurvey FieldGenius. Following the steps in this guide you will learn how to: Add a predefined coordinate system, Create a new user-defined ...
Use this short article as a guide to computing transformation parameters WHILE you collect GPS observations. Be sure to watch the movies first....
A detailed explanation of the records found in a RAW file or RW5 file written by FieldGenius when working with GPS. This article looks at a typical observation record....
Use this short article as a guide to computing transformation parameters AFTER you have collected your first GPS observations. Be sure to watch the movies first....
The NMEA drivers provide connection and allow FieldGenius, FieldGenius for Android and Evidence Recorder to connect to inexpensive GNSS Receivers through third-party softwares. These GNSS receivers a...
Please review the attached article...