After updating to FieldGenius 8.3 or later some users have reported issues when connecting to their GeoMax devices (such as Zenith 25) via bluetooth when using a Windows 10 tablet. Follow the steps be...
The Stonex S10 GPS reciever has a special utility tool to calibrate the sensor's tilt compensator. This calibration tool requires multiple steps to complete and must be preformed on a data collector r...
FieldGenius, Layout, Seismic Surveyor and Evidence Recorder can connect with the Topcon ES. Please note that Rapid S EDM mode will not be available. To prepare the Topcon, follow these steps: 1. Go to...
This guide describes how to configure MicroSurvey FieldGenius to collect Stop and Go GNSS data using a GeoMax Z25 GNSS receiver. The goal is to import this data into GeoMax Geo Office for later post ...
If you have an Altus APS-3 and want to use the GSM module to make your receiver a Network Rover you need to contact your internet service provider and ensure that the SIM card they will provide meets ...
This guide describes how to start Kolida FieldGenius on your Kolida total station, create a new project, setup your instrument over a point, measure a backsight, and start surveying. This is the perf...
This guide describes how to connect a Leica iCON 50 robotic total station to a Leica CC51 data collector using MicroSurvey Layout and Long Range Bluetooth. This guide actually describes 3 methods of c...
This guide describes how to create a GPS GSM network profile using a GeoMax Z25 GNSS receiver, a Getac PS236 data collector, and FieldGenius 2012. In this guide you will learn how to connect a GeoMax ...
This guide describes how to connect a Leica Builder total station to a Leica CC50 data collector using MicroSurvey Layout. This guides describes 2 methods of connecting the Builder to the CC50. The f...
TopCon QS and FC2500 Bluetooth Connection Guide A TopCon QS and FC2500 are similar to the TopCon GPT 9003A and the FC2200 units. To connect a TopCon QS total station to a FC2500 data collector using ...