Attached with this article is a guide giving detailed instructions for configuring your DT Research tablet. Many thanks to Chris Pucci and the people with the Oregon Department of Transportation for...
Windows 10 tablets have the ability to utilize the Windows on-screen touch keyboard. Below are the suggested settings for maximizing efficiency when typing in FieldGenius, Layout or Evidence Recorder....
Click attachment link below to access overview of MicroSurvey DC6 Pamphlet NOTES: - The Serial port is identified as Com 5 in the MicroSurvey DC6. - The DC6 only supports 2.4G WiFi - Phone calls wit...
You can determine the COM port of your internal GPS by looking in the device manager Go to Start > Settings > Devices > Connected devices > Device manager > Ports (COM & LPT) such as u-blox Virtual CO...
Due to a recent operating system update, FieldGenius 8.4 (or later) may show a blank Device ID when installed on a Juniper Archer 2. Solution: 1. Black up any important files (FieldGenius Projects,...
Extra steps may be required when connecting a DT Research Windows 10 tablet to certain Bluetooth devices (mainly Geomax and Leica total stations or long range Bluetooth antennas). When connecting to...
The majority of FieldGenius customers who have the CS20 Data Collector use a zip drive to copy files from the handheld devive to their PC. But some users are more used to using a cable with other mode...
This article will follow the steps required to connect your Windows Mobile Handheld Device to a wifi network. This is often done when using the Data Collector Internet method of accessing an RTK corre...
Summary In some cases MicroSurvey FieldGenius/Layout/EVR is unable to connect to a Bluetooth device until Windows Bluetooth Pairing is performed. The steps below are a general reference that can in so...
Please Note: Windows Mobile Device Center is no longer supported by Microsoft or MicroSurvey. Some customers have reported that the utility works on newer computers but in most cases the software wil...